NETWORK LAN TESTER POE, RJ45, RJ11, COAXIAL CABLE
The LAN and PoE tester can easily check the proper pin configuration of 10Base-T, 10Base-2, modular RJ45/RJ11, 258A, TIA-568A/568B and Token Ring cables. The product works by comparing the two ends of the cabling - the source and the receiving end of the signal.
Thanks to the remote module, the user can check the operation of cables whose other end is far away and ends at a surface socket or patch panel.With this device, we can easily check the continuity of cables and detect transmission problems
such as short circuit, incorrect pair/conductor arrangement or reverse connection of wires to pins.
The product allows you to:
- Verify the correct pin configuration of 10Base-T, 10Base-2 Ethernet cables, RJ45/RJ11 modular cables, 258A, TIA 568A/568B and Token Ring cables.
- Verify the test status of a given cable and confirm its correct operation (continuity) and detect problems such as short-circuit, incorrect pair/conductor arrangement or reverse connection of conductors to pins.
- Testing of cables, the other end of which is far away and ends at a surface socket or patch panel.
- Ground control.
- Choice of scanning mode - automatic or manual (manual).
- Operation with a 9V battery (not included - purchase required).
Package contents
1 x LAN tester main module
1 x Remote module (terminator) of LAN tester
2 x BNC cable adapter
1 x BNC M/M adapter
3 x RJ-45 to RJ-11 adapter
1 x User's manual
Specification
| Type | Network tool |
| Work signal | LED |
| Connectors | BNC, RJ-11, RJ-45 |
| Colour | Black, Blue |
| Number of POE ports | 1 |
| Weight | 140 g |
| Power Requirements | 9V |
| PoE power supply type | PoE |
| Weight | 0.14 kg |
