INCREASE YOUR FEELING OF SAFETY

Almost every family uses equipment running on natural gas or LPG, and this is connected with the risk of accidental leakage. Therefore, the gas detector Lanberg SR-1003 is a useful device in every house or apartment. It allows for the rapid detection of high concentrations of gases and the prevention of dangerous situations.

YOUR DAILY GUARD

The SR-1003 detector provides continuous monitoring of the presence of gases in the room, through the use of modern methods of electrochemical processing. The sensor reacts directly with detected gases that exceed the permissible limits, emitting a linear signal (about 85 dB), warning of the possibility of leakage and the need for precautionary measures.

SIMPLE SERVICE

The device is simple and intuitive in use. The TEST button and LED allow you to monitor the correct operation of the sensor. In addition, the device does not require additional installation, except for installation on the wall and connection to an electrical outlet.

INSTALLATION – FIND OUT WHAT GAS YOU USE, AND STAY SAFE

Depending on the type of gas used in the room, the detector must be mounted on the wall.

A. At a distance of at least 50 cm from the ceiling and at a distance of 1.5 m from the gas source in the case of natural gas.

B. If the gas alarm is used to detect compressed natural gas or coal gas, the main components of which are propane or butane, that is, gas heavier than air, the device must be installed below, at a distance of 30 cm (or less) from the ground and at a distance of 1.5 m from the gas source of the LPG type.

DISCREET ALLY

Lanberg gas alarm system has a modern durable and discreet design. Small size and weight, as well as white color are suitable for decoration of most rooms at home or in the office.

SPECIFICATION

• Rated voltage: AC230V/50~60HZ


• Power dissipation: <6W


• Alarming level of gas density: gas<25%LELL


• Alarm loudness / effective range: >85db/3m


• Wymiary produktu: 126 x 73 x 76 mm


• Operating temperature: -10~+50


• Operating humidity: 10%~85% RH